International Gelshield Plus Epoxy Primer

€267.46

The INTERNATIONAL Gelshield Plus is a high-build, solvent-free epoxy primer designed for treating osmosis in fiberglass boat hulls.

Available in Blue and Green, allowing easy identification of each coat for even and complete coverage.

SKU: XYCE00011462 Category:
Description

INTERNATIONAL Gelshield Plus is a two-component epoxy coating that creates a thick, water-resistant protective barrier on boat hulls affected by osmosis.

Its solvent-free formula helps prevent moisture penetration and reduces the risk of blistering returning after proper hull treatment.

The contrasting Blue and Green colors make it easier to apply multiple coats without missing areas.

For effective results, the damaged gelcoat must be removed and the fiberglass surface thoroughly dried and prepared before application.

Before applying antifouling paint, a coat of INTERNATIONAL Gelshield 200 is required.

Model Color Kit Size
YAA221 Blue 2.25L
YAA220 Green 2.5L*

The 2.5L nominal kit designation corresponds to approximately 2.25L of mixed product.

Note: Not suitable for direct application over intact gelcoat. Follow the manufacturer’s instructions for proper osmosis treatment.

TECHNICAL INFORMATION

TECHNICAL INFORMATION

Download technical datasheet

Contains detailed information on everything from the substances used to the application method.

Gelshield-Plus-datasheet-en

Technical Specifications

  • Brand: INTERNATIONAL
  • Series: Gelshield Plus
  • Type: Two-Component Epoxy Primer
  • Colors: Blue / Green
  • Formula: Solvent-Free
  • Mixing Ratio: 2:1 (Base : Hardener) by volume
  • Recommended Coats: 4
  • Minimum Film Thickness: 150 microns per coat
  • Practical Coverage: Approximately 6m²/L per coat
  • Application: Brush or Roller
  • Pot Life: Approximately 25 minutes at 23°C
  • Suitable Surfaces: Prepared fiberglass (GRP/FRP) and epoxy fillers
  • Thinning: Do not thin
  • Use: Osmosis treatment on boat hulls