International Gelshield Plus Blue Kit 2.25lt

Name: International Gelshield Plus Blue Kit, 2.25lt
Brand: International
SKU: XYCE00011462
Price: 267.46 EUR
Availability: InStock

International Gelshield Plus Blue Kit, 2.25lt

€267.46

The International Gelshield Plus Blue Kit 2.25lt is a high-build, solvent-free two-component epoxy developed for the treatment of osmosis in GRP / fibreglass boat hulls.

It creates a thick protective epoxy barrier, with a minimum 150-micron film build per coat, and its blue colour makes it easier to monitor coverage when alternating with the green version.

In stock

SKU: XYCE00011462 Category: Marine Primers

International Gelshield Plus is designed specifically for the professional treatment of osmosis in fiberglass hulls. After the affected gelcoat has been correctly removed and the laminate has been thoroughly dried and prepared, Gelshield Plus forms a high-build epoxy barrier that helps restore and protect the hull.

Its 100% solids, solvent-free formulation contains no harmful solvents that can migrate into the laminate and contribute to renewed blistering. The product provides excellent film build, achieving at least 150 microns per coat.

The system is normally applied in 4 coats by brush or roller. Blue and green versions can be alternated between coats, making it easier to visually confirm complete and even coverage. Practical coverage is approximately 6 m²/lt per coat.

Before applying antifouling, International specifies the use of Gelshield 200 as a tie coat. Gelshield Plus should not be applied directly over intact gelcoat and must not be thinned.

Technical Details

Specification	Details
Product	International Gelshield Plus
Colour	Blue
Kit Size	2.25lt
Type	Two-component high-build epoxy
Use	Osmosis treatment
Mix Ratio	2:1 by volume
Volume Solids	100%
VOC	0 g/L as supplied
Number of Coats	4 for treatment system
Minimum Film Thickness	150 μm per coat
Theoretical Coverage	Approx. 6.7 m²/lt
Practical Coverage	Approx. 6.0 m²/lt
Application	Brush / Roller
Thinning	Do not thin
Suitable Substrates	Prepared cured polyester laminate and epoxy fillers
Pot Life at 23°C	Approx. 25 minutes

These application and technical values are specified by International for Gelshield Plus.

Important: Correct osmosis treatment requires thorough removal of the affected gelcoat, proper drying of the hull and careful substrate preparation. The manufacturer recommends professional assessment to confirm that the laminate is sufficiently dry before coating. Do not apply Gelshield Plus directly onto intact gelcoat or at ambient temperatures below 10°C.