Etalon Silicon Remover 1L

Professional Surface Degreaser Before Painting

Correct surface preparation is one of the most important stages of any professional paint job.

The Etalon Silicon Remover 1L is a high-quality cleaning and degreasing agent designed for use immediately before painting.

It helps remove contamination that can interfere with the coating process, including:

• Grease
• Oil residues
• Silicone contamination
• Fingerprints
• Workshop dirt
• Polishing-product residue
• General surface contamination

A clean, properly degreased surface helps reduce the risk of coating defects and provides better conditions for the following primer or paint application.

Designed as a Professional Panel Wipe

Etalon describes the product as a professional degreaser / panel wipe.

It is intended for the final cleaning stage after the main surface preparation has been completed.

Typical preparation may include:

Cleaning → Sanding → Dust Removal → Degreasing → Painting

Using the Silicon Remover immediately before coating helps ensure that contamination introduced during handling or preparation is removed.

Ready to Use

The Etalon Silicon Remover requires:

No dilution

It is supplied ready for direct professional use.

This simplifies preparation and helps maintain consistent cleaning performance without needing to calculate mixing ratios.

Suitable for Metal Surfaces

Etalon specifies the cleaner for use on metallic surfaces.

Depending on the complete paint system, it can be useful during preparation of compatible:

• Steel
• Aluminium
• Stainless steel
• Galvanized metal
• Previously painted metal surfaces

Always confirm compatibility with the coating manufacturer, particularly when working with specialized substrates or finishes.

Suitable for Compatible Polymer Surfaces

The technical data also specifies suitability for polymer surfaces.

This makes the cleaner useful for suitable composite and plastic components during refinishing preparation.

On yachts, this may include compatible GRP or other polymer-based surfaces where the coating system allows solvent cleaning.

Extra care should be taken with sensitive transparent plastics such as acrylic and polycarbonate. Always test compatibility before use and follow the surface manufacturer’s recommendations.

Ideal for Yacht & Boat Refinishing

Paint preparation on a yacht requires extremely clean surfaces.

Small amounts of:

• Grease
• Silicone
• Wax-like contamination
• Fingerprints
• Polishing residue

can interfere with a professional paint application.

Etalon Silicon Remover is therefore particularly useful for:

• Yacht refit
• Boat refinishing
• Hull paint preparation
• Superstructure repairs
• Primer preparation
• Local paint repairs
• GRP refinishing
• Metal fitting refinishing
• Professional marine workshops

It provides a simple final cleaning stage before applying the selected coating system.

Helps Prevent Paint Contamination

Silicone and greasy residues are particularly undesirable before painting.

Contaminated surfaces can contribute to problems such as:

• Poor wetting
• Uneven coating appearance
• Surface defects
• Local adhesion problems
• Additional sanding and repainting

Thorough degreasing before coating helps reduce these avoidable risks.

Useful Before Primer

The cleaner can be used during final preparation before suitable primer application.

Typical applications include preparation before:

• Epoxy primer
• Acrylic primer
• Compatible adhesion primers
• Repair primers
• Refinishing systems

The surface should be fully prepared according to the primer manufacturer’s instructions before coating.

Useful Before Paint & Clearcoat

Etalon Silicon Remover is also valuable during later stages of professional refinishing.

It may be used where specified before suitable:

• Basecoats
• Topcoats
• Clearcoats
• Repair coatings

Always follow the individual paint system’s instructions regarding cleaning immediately before application.

Easy Cloth Application

Etalon recommends applying the product with a:

• Soft lint-free cloth
• Suitable sponge

A clean, lint-free cloth is especially useful during final paint preparation because it reduces the possibility of fibres being left on the prepared surface.

Always replace heavily contaminated cloths rather than continuing to spread removed dirt over the panel.

Application Temperature

The recommended application range is:

+10°C to +35°C

Using the product within its specified temperature range helps maintain predictable cleaning and evaporation behaviour.

Avoid working on excessively hot surfaces or in direct intense sunlight.

Why Choose Etalon Silicon Remover?

Paint quality depends heavily on preparation.

Even premium primers and topcoats cannot perform at their best when applied over contaminated surfaces.

Etalon Silicon Remover provides a straightforward professional solution for:

• Final degreasing
• Surface preparation
• Silicone-contamination removal
• Pre-paint cleaning
• Workshop preparation
• Yacht and boat refinishing

For professional painters and refit teams, it is an essential preparation product rather than an optional finishing accessory.

Key Benefits

• Professional Etalon degreaser
• High-quality pre-paint cleaner
• Removes surface contamination
• Helps remove grease and oily residues
• Suitable for final preparation before painting
• Ready to use
• No dilution required
• Suitable for metallic surfaces
• Suitable for compatible polymer surfaces
• Easy application with lint-free cloth or sponge
• Application range +10°C to +35°C
• Ideal for yacht and boat refinishing
• Useful before primer and paint systems
• Professional 1L packaging
• CFC-free formulation

How to Use

1. Complete the required sanding and surface preparation.
2. Remove loose sanding dust thoroughly.
3. Ensure the surface is suitable for solvent cleaning.
4. Apply Etalon Silicon Remover to a clean, soft, lint-free cloth or suitable sponge.
5. Clean the surface thoroughly, working in manageable sections.
6. Pay particular attention to areas that may contain grease, fingerprints or polishing residue.
7. Use clean sections of the cloth as contamination is collected.
8. Allow the surface to become completely clean and dry before coating.
9. Inspect the surface before applying primer or paint.
10. Repeat the cleaning process if contamination remains.

Always follow the technical instructions of the coating that will be applied afterwards.

Professional Preparation Tips

For cleaner results:

• Wear clean gloves after final degreasing.
• Avoid touching the prepared surface with bare hands.
• Use clean, lint-free wiping cloths.
• Replace dirty cloths frequently.
• Keep the product container closed when not in use.
• Do not use contaminated workshop rags.
• Remove sanding dust before degreasing.
• Do not allow surrounding polish, wax or grease to contaminate the prepared area.
• Test sensitive polymer surfaces first.
• Apply the next coating according to its technical data sheet.

Silicon Remover Is Not a Cured Silicone Sealant Remover

Despite the product name, Etalon Silicon Remover is primarily a pre-paint cleaner and degreaser.

It should not be confused with specialist chemical products designed to dissolve or mechanically remove cured silicone sealants from joints.

Its main purpose is to clean and degrease surfaces before painting and remove contamination that can interfere with the refinishing process.

Technical Specifications

Brand: Etalon
Product: Silicon Remover
Etalon Product Code: ET/ANTISIL-1
Product Type: Professional Degreaser / Panel Wipe
Volume: 1L
Form: Liquid
Application: Pre-paint cleaning & degreasing
Suitable Substrates: Metallic and compatible polymer surfaces
Dilution: Ready to use
Application Method: Soft lint-free cloth or sponge
Application Temperature: +10°C to +35°C
CFC Free: Yes
Shelf Life: 36 months
Marine / Yacht Application: Yes
Manufacturer Carton Quantity: 6 x 1L

Recommended Applications

Ideal for:

• Yacht paint preparation
• Boat refinishing
• Hull preparation
• Superstructure preparation
• GRP refinishing
• Metal surface preparation
• Primer preparation
• Local paint repair
• Refit projects
• Professional paint workshops
• Final degreasing before painting

Storage

For correct storage:

• Keep the container tightly closed.
• Store in a cool and dry location.
• Keep away from direct sunlight.
• Keep away from heat and ignition sources.
• Store away from food.
• Maintain good ventilation in the storage and working area.
• Keep the product in its original correctly labelled container.

Safety

Etalon Silicon Remover is a highly flammable solvent-based product and must be handled accordingly.

During use:

• Ensure good ventilation.
• Keep away from sparks, flames and hot surfaces.
• Do not smoke nearby.
• Avoid breathing vapours.
• Wear suitable protective gloves.
• Use suitable eye protection.
• Avoid unnecessary skin contact.
• Keep away from children.
• Do not discharge the product into drains or the marine environment.
• Follow the current Etalon Safety Data Sheet before professional use.