Bilge Pump 1500GPH 12V

The 1500GPH 12V Bilge Pump provides an effective solution for keeping the bilge area of a boat clear of accumulated water.

Its submersible design allows the pump to be installed directly in the bilge, where it can remove water and transfer it through the connected discharge hose to the appropriate outlet.

With a rated capacity of 1500 gallons per hour, equivalent to approximately 5,678 L/h, it offers substantial pumping performance while operating from the standard 12V electrical system found on many yachts and boats.

The compact vertical design helps reduce the space required for installation, making the pump suitable for engine rooms, bilge compartments and other areas where available space may be limited.

The removable lower strainer helps prevent larger debris from reaching the impeller while also providing access for periodic inspection and cleaning. Regular cleaning of the strainer is important for maintaining efficient water flow.

Technical Details

• Product: Bilge Pump
• Type: Electric submersible bilge pump
• Rated Flow: 1500 GPH
• Approximate Flow: 5,678 L/h
• Operating Voltage: 12V DC
• Application: Bilge water removal
• Installation: Submersible
• Suitable for: Yachts, motorboats, sailing boats and marine vessels
• Construction: Compact marine pump housing
• Lower Strainer: Removable for cleaning and maintenance
• Electrical Connection: 12V onboard electrical system
• Product Marking: CE / RoHS shown on product packaging/image

Marine Use

A properly installed bilge pump is an important part of a vessel’s onboard drainage system. The 1500GPH capacity makes this model suitable for applications where greater pumping capacity is required compared with smaller bilge pumps.

For best performance, the discharge hose should be correctly sized and installed with as few restrictions and sharp bends as possible. Actual pumping capacity can decrease as discharge height and hose resistance increase.

Important: The stated 1500 GPH is the nominal pump capacity and actual flow will depend on installation conditions, discharge height, hose length and restrictions. The pump should be installed with an appropriate fuse, wiring and discharge arrangement according to the vessel’s electrical system and applicable marine installation requirements. A bilge pump should not be considered a substitute for correcting the source of water ingress.