Cosmos Lac Alu-Zinc Spray, 400ml
€8.66 Original price was: €8.66.€7.79Current price is: €7.79.
Zinc for lighter, and shinier effect. It offers anti-rust cathodic protection for all metal surfaces. It is a good conductor of electricity and can be used for repairs and maintenance for “white” metals and hot-dip galvanised surfaces.
In Stock
DESCRIPTION
Zinc for lighter, and shinier effect. It offers anti-rust cathodic protection for all metal surfaces. It is a good conductor of electricity and can be used for repairs and maintenance for “white” metals and hot-dip galvanised surfaces.
FEATURES
- Creating a zinc-rich coating
- Good electricity conductor
- Fast drying
- Good filling
- Anticorrosive properties
- Outstanding catholic corrosion prevention
- Resistance to petrol, chemicals, and weather influences
- Spot-weldable
- Excellent adhesion
- Resistance to high temperatures and heat
- 400ml
APPLICATION
Suitable for DIY or professional use. Ideal for protection of welds, piping, tanks, and all metal structures exposed to corrosive agents. Proper for repairing galvanized surfaces.
CAP SYSTEM

– High Coverage
– Thin & Regular
– Gradual Spraying
– No drips
INSTRUCTIONS FOR USE
Shake the container at least 3 minutes after you hear the mixing ball. Before the first use spray it in the air for 3-4 seconds to remove any condensed color. After use turn the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one. Use outdoors or in a well-ventilated area such as an open garage. Optimal application at temperature: 10-25°C and humidity below 65% to ensure proper drying. Storage 05-35°C.
TIPS:
- Ensure the surface is clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface
- Wear protective gloves, protective clothing, eye/face protection
- Always paint in an open space in the open air
- Always spray with the can in a vertical position, otherwise the paint might ‘spit’ unevenly
Spray surface from a distance of 25-30cm - Paint first vertically and then horizontally
- Apply Zinc Spray in several thin layers to avoid overapplication. Before each layer, shake the spray can well. Once the spray dries, a primer and a lacquer can be applied
- After use, clean the Zinc Spray valve (turn the aerosol upside down and press the nozzle for approx. 5 seconds). The drying time depends on ambient temperature, air humidity, and thickness of the lacquer applied